Advanced laser solutions for interconnect and component production.

LinkedIn PPI Site

YouTube PPI Site Facebook PPI Site


PPI Systems Laser Drilling and Resistor Trimming Systems

video PPI Systems corporate overview
PPI Systems Profile Based in Ottawa, Canada, PPI designs and manufactures turn-key laser drilling and trimming systems for the electronic interconnect and component markets from its 23,000 square foot production facility. 35.1 MB, 720p, 46 seconds



         Request for Information


         Contact us for your laser-based material processing solution







          • Laser Via Drilling Systems

          Laser Trim and Test Systems





         Software Package


         • ProSys Software

RapiTrim Laser Resistor Trimming Systems

video laser resistor trimming active trim Video laser resistor trimming flying probe operation video laser resistor trimming stack loader
Active Trimming with Robotic Automation Active trimming system fixturing for backside contact, with magazine and robotic automation. 58.9 MB, 720p, 43 seconds
Flying Probe Operation Standard models incorporating PPI's proprietary high-speed flying probe technology eliminate probe cards with their inherent limitations, providing many advantages. 25.4 MB, 720p, 53 seconds
Stack Loader Both load and unload stacks are located in the front of the system for easy access. Substrates up to 200 x 200 mm are loaded by vacuum pickup. 64.4 MB, 720p, 97 seconds
Video laser resistor trimming probe tip exchange
RapiTrim-C Automatic Probe Tip Exchange Anytime a change in probe tips is required, the current set (one or all) can be unloaded into an empty holder and fresh tips loaded from an adjacent holder. 64.4 MB, 720p, 97 seconds

ProVia Laser Via Drilling Systems

video laser via drilling tray removal Video laser via drilling tray loading Video compact loader operation
FP-UC Compact Loader - Tray Removal Demonstration of a tray removal and reload in a ProVia FP-UC dual CO2 and UV laser drilling system. 28.3 MB, 720p, 30 seconds
FP-UC Compact Loader - Tray Loading Demonstration of a tray loading in a ProVia FP-UC dual CO2 and UV laser drilling system. 20.7 MB, 720p, 24seconds
FP-UC Compact Loader Operation A short video outlining the operation of the compact autoloader in the ProVia FP-UC laser drilling system. 40.3 MB, 720p, 45seconds
Video laser via drilling laser processing Video laser via drilling and laser resistor trimming automation.
ProVia Laser Processing Operation of a ProVia Laser UV and CO2 Via Drilling System in the PPI Systems main application laboratory. 92.1 MB, 720p, 54seconds
ProVia and RapiTrim Automation This automation scheme applies to both the ProVia laser drillers / cutters and the RapiTrim fixtureless trim and test systems. 416 MB, 1080p, 3:05 minutes

© 2021 PPI Systems Inc. All rights reserved.